Flat Inductive Proximity Sensor

Features

  • Standard Flat Sensors in many different variations for various purposes.
  • Only 6mm thick yet provides a sensing distance of 3mm(P2S-F3NA).
  • With indicator for operating state.
Ordering Information
Output Circuits
Mounting Bracket (Accessory)
DC 3 - Wire
Type P2S-F1R5□□ P2S-F3□□ P2S-F5□□
Max sensing distance 1.5mm±10% 3mm±10% 5mm±10%
Sensing distance 0~1.2mm 0~2.4mm 0~4mm
Sensing object Iron,8x8x1mm Iron,12x12x1mm Iron,18x18x1mm
Voltage  12~24V DC pulse(P-P)10% max.
Leakage current 15mA max. 10mA max.
Control output open-collector output 100mA max.(DC30V)
Differential travel 10% max. of sensing distance
Response speed 1kHz min. 600Hz min. 500Hz min.
Protection circuits Power supply reverse polarity protection,Surge suppressor
Indicator Detection indicator(red LED)
Ambient temperature Operating/Storage：-25~+70℃(with no icing or condensation)
Ambient humidity Operating/Storage:35~95%RH(with no condensation)
Residual voltage 1V max.(Load current:200mA, Cable length:2m) 1V max.(Load current:50mA, Cable length:2m)
Insulation resistance 50MΩ max.(DC500V) between current -carrying parts and case
Dielectric strength AC1000V 50/60Hz 1min between current -carrying parts and case
Vibration resistance 10~55Hz 1.5mm 2h double amplitude for 2 hours each in X,Y and Z directions
Shock resistance 500m/s2 3 times each X,Y and Z directions
Degree of protection IEC-IP67
Material Case Heat-resistant ABS
Sensing surface Heat-resistant ABS
Weight Approx.70g Approx.70g Approx.80g
Accessories Mounting Bracket -