TOPRN is an open-frame industrial HMI series intended for equipment builders that need a flush, clean embedded interface rather than a conventional framed panel unit. The catalogue describes landscape and portrait orientation, standard or flat-mount options, mounting holes and a front sheet arrangement designed to help prevent dust or foreign-material build-up.
This series is intended for industrial automation environments where the HMI must be selected around the required interface layout, operator experience and installation method. Orbital Mekatronik can review the application inputs and help you request a suitable configuration or exact model.
| Parameter | Catalogue information |
|---|---|
| Catalogue family | TOPRN Series open frame HMI |
| Models shown | TOPRN1000UD, TOPRN0700WD and TOPRN0400WD |
| Display sizes | 10.1 inch, 7 inch and 4.3 inch TFT colour |
| Colour | 16M colours stated |
| Resolution | 1280 x 800 for 10.1 inch; 800 x 480 for 7 inch; 480 x 272 for 4.3 inch |
| Touch | Analog resistive film; touch drag and memo functions described |
| CPU | Quad-core CPU |
| Interfaces | Serial, Ethernet, USB host and USB device; exact count varies by model |
| Communication | Catalogue states compatibility with over 400 controllers and cites Modbus and EtherNet IP |
| Power | 24 VDC 20 to 28 VDC; 15 W stated |
| Environment | -10 to +50 C operation; 0 to 90 percent RH no dew; no corrosive gas |
| Protection and construction | IP66 shown; panel fabrication information referred to in hardware manual |
The open-frame construction can support integrated operator screens where external bezels are not preferred.
Flat mounting and front-sheet design can help maintain a clean operator surface where appropriate.
The catalogue states both orientations are supported; confirm the exact display and mechanical design.
4.3, 7 and 10.1 inch options offer a size path according to the required information density and space.
For TOPRN selection, share the required active display size, final front-panel drawing, flat or standard mount preference, portrait or landscape orientation, enclosure sealing expectation, PLC communication, panel cutout and volume. Open-frame equipment integration should be checked against the hardware manual before production release.
Confirm the exact model code, display size, ports, controller protocol, power requirement, mounting dimensions, environmental protection, optional hardware and certificate status before procurement. Do not assume a feature is included across every series variant.
Send the controller make and model, protocol, required screen size, panel or machine mounting details, power supply, quantity and site location. Orbital Mekatronik can help align the HMI selection with the integration requirement before you place the order.