Ultra-slim Body Area Sensors / Bin Sensors
Features
- Ultra-slim Body only 10mm thickness.
- Bright, easy-to-see operating indicator with 8 LED.
- Two units can now be operated ina side-by-side configuration without interference, for problem-free detection over wider areas.
- Its long sensing range of 3m is sufficient for confirming access to a parts shelf.
- Sensor units can be set to detect the interruption of 1 or more beam channels, or can be set to detect only the interruption of 2 or more beam channels.
Note: This device is an Area Sensor / Bin Sensor and must not be used as a Safety Sensor/ Device for human safety for protection of hand or part of body. It does not incorporate a self checking circuit for safety functions necessary to be allow its use as a safety device. A system failure may result in an energised or de energised contact element.
Ordering Information
Output Circuits
Dimensions
Ratings and Specification
Type | T5N-XN5 | T5N-XP5 | |
Sensing height | 100mm | ||
Sensing object | Opaque object:φ35mm min. | ||
Sensing range | 0.2~3m(When setting “SHORT”:0.05~1m) | ||
Beam pitch | 25mm | ||
Voltage | 12~24V DC pulse(P-P)±10% max. | ||
Current consumption | Emitter:0.5W max. Receiver:0.8W max. |
Emitter:0.6W max. Receiver:0.9W max. |
|
Output | (NPN) NPN Open-colletector transistor - Maximun sink current:100mA - Applied voltage:30V DC max. (between output and 0V) - Residual voltage: 1V max.(sink current:100mA) 0.4V max.(sink current:16mA) |
(PNP) PNP Open-colletector transistor - Maximun sink current:100mA - Applied voltage:30V DC max. (between output and +V) - Residual voltage: 1V max.(sink current:100mA) 0.4V max.(sink current:16mA) |
|
Output operation | ON or OFF when one or more beam channels are interrupted/ ON or OFF when two or more beam channels are interrupted (selectable by operation mode switch) |
||
Short-circuit protection | Incorporated | ||
Response time | 10ms max.(when the interference prevention is used,in Light state:30ms max.,in Dark state:13ms max.) | ||
Interence prevention function | Incorporated | ||
Ambient temperature | Operating: -10~+55℃, Storage: -20~+70℃(with no icing or condensation) | ||
Ambient humidity | Operating: 35~85%RH, Storage: 35~85%RH(with no condensation) | ||
Emitting element | Infrared LED (synchronized scanning system) | ||
Degree of prcaotection | IEC-IP62 | ||
Material | Enclosure:Heat-resistant ABS,Lens cover: Acrylic,Indicator cover:Acrylic | ||
Weight | Approx:Emitter: 70g Receiver: 80g |