Ultra-slim Body Area Sensors / Bin Sensors
Features
- Ultra-slim Body only 13mm thickness.
- Both the receiver and the emitter feature job indicators,102 mm, with red bright LED.
- Three channel types, includes 8, 12, and 16 beam.
- Interference prevention for parallel installation.
- Selectable lighting pattern.
Note: This device is an Area Sensor / Bin Sensor and must not be used as a Safety Sensor/ Device for human safety for protection of hand or part of body. It does not incorporate a self checking circuit for safety functions necessary to be allow its use as a safety device. A system failure may result in an energised or de energised contact element.
Ordering Information
Output Circuits
Dimensions
Ratings and Specification
Number of Optical axis | 8 Optical axis | 12 Optical axis | 16 Optical axis | |||||
Type | T6N-XN8 | T6N-XN12 | T6N-XN16 | |||||
T6N-XP8 | T6N-XP12 | T6N-XP16 | ||||||
Sensing height | 140mm | 220mm | 300mm | |||||
Sensing object | Opaque object:φ30mm min. | |||||||
Sensing range | 4m | |||||||
Beam pitch | 20mm | |||||||
Voltage | 12~24V DC pulse(P-P)±10% max. | |||||||
Current consumption | Emitter | Job indicator ON | 0.7W max. | 0.8W max. | 0.9W max. | |||
Job indicator OFF | 0.6W max. | 0.7W max. | 0.8W max. | |||||
Receiver | Job indicator ON | 0.7W max. | 0.8W max. | 0.9W max. | ||||
Job indicator OFF | 0.6W max. | 0.7W max. | 0.8W max. | |||||
Output | (NPN) NPN Open-colletector transistor - Maximun sink current:100mA - Applied voltage:30V DC max. (between output and 0V) - Residual voltage: 1V max.(sink current:100mA) 0.4V max.(sink current:16mA) |
(PNP) PNP Open-colletector transistor - Maximun sink current:100mA - Applied voltage:30V DC max. (between output and +V) - Residual voltage: 1V max.(sink current:100mA) 0.4V max.(sink current:16mA) |
||||||
Output operation | ON when all Optical axis are received(OFF when one or more Optical axis are interrupted) | |||||||
Short-circuit protection | Incorporated | |||||||
Response time | 10ms max.(when the interference prevention is used:12ms max.) | |||||||
Indicators | Emitter | Emitting indicator: Green LED x 2(Light up during emission;one LED lights up for Frequency Asetting, both LEDs light up for Frequency B setting) Job indicator:Red LED(Lights up,blinks or lights off when the job indicator input is applied,selected by operation mode switch) |
||||||
Receiver | Operation indicator:Red LED(Lights up when one or more Optical axis are interrupted) Stable incident beam indicator:Green LED(Lights up when all Optical axis are stably received) Job indicator:Red LED(Lights up,blinks or lights off when the job indicator input is applied,selected by operation mode switch) * When an excess current flows through the output,the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit. |
|||||||
Interence prevention function | Incorporated | |||||||
Ambient temperature | Operating:-10~+55℃, Storage:-10~+60℃(with no icing or condensation) | |||||||
Ambient humidity | Operating:35~85%RH, Storage:35~85%RH(with no condensation) | |||||||
Emitting element | Infrared LED(modulated) | |||||||
Degree of prcaotection | IEC-IP40 | |||||||
Material | Enclosure:Heat-resistant ABS,Lens cover: Polyester,Indicator cover: Acrylic | |||||||
Weight | Approx:350g | Approx:400g | Approx:450g |